Leak Sensor and Open / Close Sensor Heartbeat Monitoring, Low Battery Monitoring

In the last week I finally got the programming done for heartbeat monitoring and low battery monitoring. I based my programming on an excellent post on the Universal Devices forum by Belias here. I won't reproduce the programming here - it is very well discussed on the forum, but I will add some information about how I integrated it into my system.

Once I had the heartbeat programs operating, with the system variables programmed for each leak sensor and door sensor, I added a line to the notification program that notifies the user of a system fault or leak. This line controls an "Alert Notfication" keypad key scene, a "Water Leak" detected keypad key scene, or a "System Fault" keypad key scene, as appropriate.

For example, when a low battery status is received, or a missed heartbeat is received, an email notification is sent to my email address. In addition, I have an visual indication on my 8 button keypads at my entrance doors and bedroom keypad of the fault.

System Fault Indicator activated - Signals a Missed Heartbeat, Low Battery Indication on a Battery Powered Wireless Insteon Sensor. By pressing the system fault key, you can cancel the fault indication on all keypads where this signal is activated.
Check out my post on custom labelling Insteon Keypad buttons here.

I have set up these keys as controllers for the Alert scene - so that I can cancel the fault or alert on all keypads by toggling any keypad key. With the way the programs are written, they will update the notification every 12 hours - so you would have to cancel the fault indication on the keypad every 12 hours (or allow it to stay lit) until you correct the issue with the wireless device causing the fault.

Sources and Links

I hope you found this post useful. Feel free to ask questions in the comments section below. I answer all questions. If you're interested, you can help support this site by using the following links to Amazon.com in the United States. My go-to place in Canada for Insteon automation components is Aartech.ca.


Share:

No comments:

Post a Comment